# Edit this configuration file to define what should be installed on
# your system.  Help is available in the configuration.nix(5) man page
# and in the NixOS manual (accessible by running ‘nixos-help’).

{ config, pkgs, ... }:

{
  imports = [
    ../hardware/apu1.nix
    ../hardware/wel200vx.nix
    ../hardware/wle600vx.nix
    ../role/base
    ../role/router
    ../role/router-dhcp
    ../role/router-dns
    ../role/router-wireless-ap
  ];


  service.router  = {
    enable = true;
    wanInterface = "enp2s0";
    wirelessInterfaces = [ "wlp4s0" "wlp6s0" ];
    lanInterfaces = ["enp1s0", "enp3s0" ];
    internalRouterIP = "10.2.2.1";
    dhcp = {
      enable = true;
      localDomain = "test.rappi.fh2.ch";
      dhcpRange = "10.2.2.2,10.2.2.200";
    };
    recursiveDns = {
      enable = true;
      networkIdIp = "10.2.2.0";
    };
    wireless = {
      enable = true;
      wleInterface24Ghz = "wlp4s0";
      wleInterface5Ghz = "wlp6s0";
      ssid = "testnet";
      passphrase = "testnet";
  };

  # Use the GRUB 2 boot loader.
  boot.loader.grub.enable = true;
  boot.loader.grub.version = 2;
  # boot.loader.grub.efiSupport = true;
  # boot.loader.grub.efiInstallAsRemovable = true;
  # boot.loader.efi.efiSysMountPoint = "/boot/efi";
  # Define on which hard drive you want to install Grub.
  boot.loader.grub.device = "/dev/sda"; # or "nodev" for efi only

  boot.initrd.luks.devices = {
    "root" = {
      device = "/dev/disk/by-uuid/196202a2-ecb2-4c43-9a62-9e58f4d5de95";
      keyFile = "/etc/luks.keyfile";
    };
    "swap" = {
      device = "/dev/disk/by-uuid/a268e9e6-8636-42b1-84bc-0a432e493d0d";
      keyFile = "/etc/luks.keyfile";
    };
  };
  boot.initrd.secrets."/etc/luks.keyfile" = /boot/luks.keyfile;

  fileSystems = {
    "/" = {
      device = "/dev/mapper/root";
      fsType = "btrfs";
    };
    "/boot" = {
      device = "/dev/disk/by-uuid/14a4d9dc-2d3b-44e1-938e-1429f1639507";
      fsType = "ext4";
    };
  };

  swapDevices = [{ device = "/dev/mapper/swap"; }];

  networking.hostName = "etzel"; # Define your hostname.
  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.

  # The global useDHCP flag is deprecated, therefore explicitly set to false here.
  # Per-interface useDHCP will be mandatory in the future, so this generated config
  # replicates the default behaviour.
  networking.useDHCP = false;
  networking.interfaces.enp1s0.useDHCP = true;
  networking.interfaces.enp2s0.useDHCP = true;
  networking.interfaces.enp3s0.useDHCP = true;
  networking.interfaces.wlp4s0.useDHCP = true;
  networking.interfaces.wlp6s0.useDHCP = true;

  # Configure network proxy if necessary
  # networking.proxy.default = "http://user:password@proxy:port/";
  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";

  # Set your time zone.
  # time.timeZone = "Europe/Amsterdam";

  # This value determines the NixOS release from which the default
  # settings for stateful data, like file locations and database versions
  # on your system were taken. It‘s perfectly fine and recommended to leave
  # this value at the release version of the first install of this system.
  # Before changing this value read the documentation for this option
  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
  system.stateVersion = "20.03"; # Did you read the comment?

}